
Qualitative vs Quantitative Face Fit Testing: Which Should You Book?
If you’re booking face fit testing for your team, the first thing we’ll ask is which masks they wear. For disposable FFP3 masks and reusable half masks, you can usually choose between a qualitative taste test and a quantitative machine test. For a tight-fitting full-face respirator, you’ll need a quantitative test.
At Apex Health & Safety, we generally recommend quantitative face fit testing. You get a measured result for each person on the mask they’ll actually wear. That’s particularly useful if you’re buying respirators for a whole team, introducing a new mask model or arranging a site visit where different trades wear different masks.
What’s the difference between qualitative and quantitative face fit testing?

The Health and Safety Executive explains both methods in INDG479, its guidance on fit testing respiratory protective equipment (RPE). It sets out which test methods are suitable for each type of mask and what employers should expect to see in a fit test report. Read HSE's guidance on RPE fit testing INDG479
Qualitative face fit testing – when does a taste test make sense?
A qualitative face fit test is often called a mask taste test or hood test. Before the mask goes on, the tester checks whether the wearer can detect a sweet or bitter test solution. The wearer then puts on their mask and a loose-fitting test hood. As they complete a series of exercises, the tester introduces the spray into the hood. If the wearer tastes it during the test, the mask fails. www.hse.gov.uk
Say you run a small workshop and everyone wears the same model of disposable FFP3. Your question is straightforward: does that model fit each person you’re issuing it to? A qualitative test is a practical way to find out. Where we’d advise changing approach is if someone struggles to detect the test solution before their mask goes on. For that employee, a machine-based test removes the uncertainty around taste.
Quantitative face fit testing – why Apex recommends it
One common quantitative method uses a particle-counting machine. It samples the air outside the mask and inside the facepiece while the wearer carries out the test exercises. From those measurements, the machine calculates a number called a fit factor. The tester uses the result to assess whether the wearer has achieved the required fit for that type of mask.
There are three reasons we favour this method for on-site face fit testing
-
You get an objective result. A wearer can sometimes be unsure whether they’ve picked up a faint taste. With quantitative testing, the instrument takes the measurement. Your tester can talk you through the result and what it means for that particular mask.
-
It helps when choosing masks for a team. Before placing a bulk order for reusable half masks, you can trial the proposed model on the people who will wear it. If one operative needs a different size or model, you can identify that before issuing the masks. www.hse.gov.uk.
-
You can plan one visit around several mask types. Your site team might wear disposable FFP3s while your workshop staff use reusable half masks and another employee wears a full-face respirator. Give us the models in advance and we can bring the appropriate equipment for the session.
Does one face fit test cover every mask an employee wears?
A pass applies to the make, model, type and size of mask tested on that individual. For example, if an operative passes on a medium 3M 6000 Series half mask, that result doesn’t automatically cover them for a JSP Force 8 or a disposable FFP3. Even two FFP3 masks can sit differently across the bridge of the nose or around the chin.
When requesting a quote, tell us how many people need testing and how many mask models each person wears. Six employees who each wear two different masks need a different booking from six employees who use one mask each. A photo of the packaging is usually the easiest way to show us exactly what you have.
Mobile face fit testing in London, Kent and the home counties, Edinburgh and scotland and Wigan and the North West
Apex Health & Safety has three directors who are mobile face fit testers which work from three regional bases. We come to your site, workshop or offices so you can arrange testing around the working day. We also have various operatives around the UK too.
-
London and Kent – Our South East tester covers London, Kent and surrounding counties, including East Sussex and West Sussex.
-
Edinburgh and Scotland – Our Edinburgh-based tester covers sites across Scotland, including Glasgow, Fife, West Lothian and the wider Central Belt.
-
Wigan and the North West – Our Wigan-based tester covers Greater Manchester, Liverpool, Bolton, Warrington and surrounding areas.
Get a quote for on-site face fit testing
Get a quote for on-site face fit testing
Send us your site postcode, the number of people who need testing and a photo of the masks or packaging. If you’re unsure whether to book qualitative or quantitative face fit testing, we’ll talk you through the options for the masks you use.
We’ll confirm the price and your local tester’s availability, and we provide same-day certificates for successful tests.
